Description

Small aperture low voltage, thermally protected, specification grade recessed housing. For new construction. Non-insulated ceilings or where insulation can be kept 3" from the housing.

Accommodates up to 75W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four ½" KOs, one ¾" KO and four Romex knockouts with strain relief.

Specification

Housing

High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate ½" to 1-3/8" ceiling. Accommodates lamps up to 50W depending on trim used.

Transformer

Enhanced in heat dissipating cover, to provide noise free operation. Attached to junction box cover so it may be serviced from below the ceiling. Thermally protected.

• M-Class H dimming magnetic transformer.
• E-Class II dimming electronic transformer (LighTech part #LET 75 BF)
• TOR-Class H dimming toroidal transformer, providing 35% more lumens than traditional transformers. Constructed of M3 grade silicone steel.
• (Must use dimmers rated for electromagnetic transformer)

Bar Hanger

Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists.

They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20? downward angle for better contact, and the 90? pivoting mounting plate makes installation fast and accurate.

Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.

Junction Box

ETL and UL listed for through-branch circuit wiring and has four ½" KOs, one ¾" KO and four Romex knockouts with true pry-out slots and strain clamps.

Features

Integral low voltage magnetic transformer to prolong lamp life and increase lighting quality.

Thermally Protected Non-IC housing.

Designed for accent and task lighting applications.

Wire through junction box.

Preinstalled adjustable bar hangers.

Dependable, favorable design and effortless installation.

5-½" height allows use in 2"x6" joist construction.

Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.

Option

Air Shut

Gasket to prevent air flow from heated or air conditioned spaces.

Meets all national air flow requirements.

UL and C-UL listed

UL and C-UL listed

ETL and C-ETL listed

ETL and C-ETL listed

Listed

For Damp location

For Feed-through wiring