Low wattage ‐ minimum load is 2.5W this allows lower wattage lamp loads
Compact Form Factor• Cast aluminum housing• Dimmable
High voltage – High temperature wire rating
Auto Thermal cut‐off at 125°C
Auto‐Thermal Regulation
Begins dimming the lamp load proportional to the rise on case temperature above 80°C
Short Circuit Protection
High maximum case temperature 90°C
Class 2 power supply
Note:
Specifications may vary without notice
Always consult National, State and local electrical codes
IP67 products should never be immersed or exposed to direct rainfall
Parameters are measured at rated output, rated load and at an ambient temperature of 25°C
Expect slight variation including component tolerance, setup tolerance, line regulation and load regulation
Power supplies should always be stress tested and tested for EMC within specific fixtures
Where grounding/earthing is not indicated, avoid grounding/earthing or contact with grounded/earthed metal enclosures
Performance with dimmers, where supported, may vary depending on dimmer model
Subject to limited warranty (3yr for transformers, 5yr for drivers) terms and conditions as published from time to time
66938 901060010LW - LET 60 AC 120V 12V LW LET
$31.95
Product Specifications
Power : 60W
Life : 50000 hrs
Input Current : 0.5-0.5A
Input Voltage : 120-120V
Power Factor : 0.96
Input Frequency : 60Hz
Efficiency : 94%
Output Voltage : 11.7 V
Dimmable : YES
Over Temperature Protection : YES
Input Voltage Surge Protection : YES
REINFORCED INSULATION N/A
Ta (°C) 0…+50
Tc (°C) 90
WORKING HUMIDITY DRY LOCATION
STORAGE TEMP.(°C) -10…+70
VDE SAFETY N/A
VDE EMC N/A
UL E193999
PLASTIC/ METAL CASE AL ALLOY
INPUT WIRES COLOR BLACK/WHITE
INPUT WIRES SIZE 18AWG
OUTPUT WIRE COLOR BLUE
OUTPUT WIRE SIZE 16AWG DOUBLE INSULATED
WEIGHT 0.087kg
1. All parameters are measured at rated input, rated load and 25°C of ambient temperature.
NOTE
2. Specifications may vary from time to time without notice.
3. Subject to standard warranty, terms and conditions as published from time to time.
4. Lightech does not qualify LED MR16 lamps; contact the lamp manufacturer to ensure compatibility