Elite - 6” LED Retrofit Die-Cast Aluminum Lensed Baffle Dimmable Module & Trim 750-Lumens 120V White - RL63

UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION

• The Elite LED Module has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars.
• The LED Module can also be installed into most 6” incandescent downlights by using our unique Edison adapter. Over 750 usable lumens are directed from the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65W BR30, 75W BR30, and 100W PAR38 lamps and 25% less than the common 18W, 26W, and 32W CFL. Plus the Elite LED Module features 50,000hrs of life, and California Title-24 compliance.

FEATURES

• Greater light output than an 18W, 26W, and 32W CFL or a 65W BR30, 75W BR30, and 100W PAR38 while consuming less than 14W, 16W and 20W of power.

OPTICS

• The Elite-Engineered LED Module system is much more than just a simple LED retrofit. The Elite LED system is a highly engineered work of design and optical science which produces over 750 lumens! Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution. The baffle also offers the benefits of a smooth integrated light with glare reduction at a 55 degree cut-off, which minimizes brightness. Optic combinations available in Baffle, Reflector, and Wall Wash options to fit any lighting application.

DURABILITY

• Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite LED Module light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz, produces less than 20% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety.

REPEATABLE

• Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ and 90+ CRI and 27K, 30K, 35K, 40K and 50K, as rated and tested to LM-79 and LM-80 standards by a certified laboratory, and meets the California Title-24 compliance standards. Elite’s highly selective LED chips produce zero ultraviolet and virtually no infrared light.

DIMMABLE

• The Elite LED Module system is fully dimmable down to 10% of initial light output with a Triac and Electronic Low Voltage dimmer when ordered with the following options (DIMTR-120). A 0-10 Volt dimming driver can also be ordered when specified with the following options (DIM10-MVOLT). Consult Factory for details.

INTERCHANGEABLE

• The 650 lumen series and 900 lumen series Elite LED Module system works in our dedicated (LD6IC-AT, LD6RIC-AT, LD6-AT, LD6R-AT) housings and our existing 6” incandescent housings (or standard B6IC-AT, EZ6IC-AT and B6RIC-AT - 120V Only) but is also suitable for using in most 6” recessed downlight housing. The 1200 lumen Elite LED Module system works in our dedicated Non-IC (LD6-AT, LD6R-AT - 120V to 277V) housings and our existing 6” incandescent Non-IC housings (or standard B6-AT and B6R-AT) but is also suitable for using in most 6” recessed downlight housing.

ADAPTABLE

• All Elite LED Module luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 6” downlight housings and most other 6” downlight housings.

rl630 750l dimtr 120