5" LED Retrofit Module Die-Cast Aluminum Stepped Baffle 650-Lumens -  Module & Trim - 120-Volts

UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION

• The Elite LED Module has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars. The LED Module can also be installed into most 5” incandescent downlights by using our unique Edison adapter.  Over 650 usable lumens are directed from the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65W BR30 & 75WBR30 and 25% less than the common 18W & 26W CFL. Plus the Elite LED Module features 50,000hrs of life, and California Title-24 compliance.

FEATURES

• Greater light output than an 18W & 26W CFL or a 65W BR30 & 75W BR30 while consuming less than 12W and 16W of power.

OPTICS

• The Elite RL5 LED Module system is much more than just a simple LED retrofit. The Elite LED system is a highly engineered work of design and optical science which produces over 650 lumens! Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution. The baffle also offers the benefits of a smooth integrated light with glare reduction at a 55 degree cut-off, which minimizes brightness. Optic combinations available in Baffle, Reflector, and Wall Wash options to fit any lighting application.

DURABILITY

• Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite LED Module light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120V input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety.

REPEATABLE

• Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ and 90+ CRI and 27K, 30K, 35K, 40K and 50K, as rated and tested to LM-79 and LM-80 standards by a certified laboratory, and meets the California Title-24 compliance standards. Elite’s highly selective LED chips produce zero ultraviolet and virtually no infrared light.

DIMMABLE

• The Elite LED Module system is fully dimmable down to 10% of initial light output with a Triac dimmer when ordered with the following options (DIMTR-120). The Elite LED 16W driver is dimmable down to 10% of initial light output by using a 0-10V dimmer and specified with the following options (DIM10-MVOLT).

INTERCHANGEABLE

• The Elite 900 Lumen LED Module system works in our dedicated (LD5IC-AT, LD5RIC-AT, LD5-AT, LD5R-AT) housings and our existing 5” incandescent housings (or standard B5, B5R, B5IC-AT and B5RIC-AT - 120V Only) but is also suitable for use in most 5” recessed downlight housing. The Elite 900 Lumen LED Module system works in our Non-IC dedicated (LD5-AT, LD5R-AT - 120V to 277V) housing & our existing 5” incandescent Non-IC housing (B5, B5R).

ADAPTABLE

• All Elite LED Module luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 5” downlight housings and most other 5” downlight housings.  

rl530 650l dimtr 120