Description

Thermally protected, specification grade recessed housing. For new construction non-insulated ceilings or where insulation can be kept 3" from housing.

Accommodates up to 150W R40/PAR38, 120W BR40, 85W BR30 and 150W A21 lamps.

Furnished with preinstalled adjustable bar hangers. Junction box is provided with four ½" KOs, one ¾" KO and four Romex knockouts with strain relief.

Specification

Housing

High temperature painted 22 gauge cold rolled steel.construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodated ½" to 1-3/8" ceiling.

Accommodate lamps up to 150W depending on trim used.

Socket

Medium base screw shell porcelain socket preinstalled on adjustable mounting bracket is designed to allow usage of different lamp types, as well as proper and consistent lamp positioning.

Bar Hanger

Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span. They can be positioned on either the long or short axis of the housing and can be shortened for 12" joists.

They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20? downward angle for better contact, and the 90? pivoting mounting plate makes installation fast and accurate.

Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.

Junction Box

ETL listed for through-branch circuit wiring and has four ½" KOs, one ¾" KO and four Romex knockouts with true pry-out slots and strain clamps.

Thermal Protection

Standard thermal protection device guards against improper installation, overlamping and misuse of insulation material.

Features

Thermally Protected Non-IC housing.

Adjustable Socket bracket.

Wire through junction box.

Preinstalled adjustable bar hangers.

Dependable, favorable design and effortless installation.

7-¼" height allows use in 2"x 8" joist construction.

Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.

Preinstalled socket cap provides electrical contact protection against dust, paint and over spray.

Option

Air Shut

Gasket to prevent air flow from heated or air conditioned spaces.

Meets all national air flow requirements.

UL and C-UL listed

UL and C-UL listed

ETL and C-ETL listed

ETL and C-ETL listed

Listed

For Damp location

For Feed-through wiring